XTROLL Chassis Guard
From $79.95 incl. GST
Chassis Guard
- Ultimate 4wd rust prevention spray
- Full underbody treatment to stop & prevent rust.
- Guards against saltwater and sand
- Full corrosion protection
- Suitable for all vehicles new and old
- Australian made
Once applied chassis guard creates and impervious barrier protecting your vehicle from extreme salt water environment.
- Description
- How To Apply
- Trust Pilot Reviews
- VIDEO - What is Chassis Guard ?
- Reviews (1)
- Surface Preperation
- SDS
- Post Beach Care
Description
XTROLL Chassis Guard is the ultimate rust protection Spray for your 4wd.
Chassis guard is the go to under spray to stop or prevent salt water and rust from destroying your vehicle
The easy to use spray bottle application is perfect for both new and older vehicles.
With a long-lasting clear hard drying finish.
Xtroll Chassis Guard
COVERAGE: 1 Ltr will cover most 4wd underbody’s.
2 Ltr for heavily corroded vehicles or larger 4wd’s
(Up to 25 sqm on clean, well prepared surfaces)
DRYING TIME: 6 – 12 hours per coat, depending on conditions.
CLEAN UP: Mineral Turps
HOW TO APPLY: Spray evenly across all underbody surfaces.
When possible apply a second coast 4 to 6 hours after first coat
Chassis Guard Application Guide
Xtroll Chassis Guard
COVERAGE: 1Ltr will cover most 4wd underbody’s.
2 Ltr for heavily corroded vehicles
Up to 25 sq. meters on clean, well prepared surfaces.
DRYING TIME: 6 – 12 hours per coat, depending on conditions.
CLEAN UP: Mineral Terps
HOW TO APPLY: Spray evenly across all underbody surfaces.
When possible apply a second coat 4 to 6 hours after first coat.
Avoid overspray so as not to damage paintwork – Under chassis application only.
(avoid all sensors and wiring connectors)
1 review for XTROLL Chassis Guard
Add a review
Chassis Guard Preparation
Chassis Guard can be applied directly to the underbody of your 4wd.
Best practice:
- Apply Chassis Guard to a clean surface.
- Give the underbody surface a detergent based wash followed up with a degrease and water wash down.
- Once dry apply Chassis Guard.
- Allow 7 days drying time before exposing to a heavy salt water environment.
Having a grime free surface will give chassis guard a much better adhesion that may only need to be reapplied every 12 months.
Chassis Guard Application Guide
Xtroll Chassis Guard After Beach Maintenance
AFTER CARE:
The best thing about Chassis guard is how easy it is to wash away the salt and sand after hitting the beach. The barrier created by Chassis Guard will only require a water wash down to remove any remaining salt water and sand.
A water hose-off is sufficient.
When washing vehicle post beach do not apply the following to the underside of the vehicle as this will make the Chassis Guard less effective
- Degreasers
- Detergents or heavy solvents.
- Avoid Detergent and Presoak cleaners.
Chassis Guard can be re applied if required.
Hayden –
Bought this product a couple months back and only just gotten around to applying it this week. Very simple to apply as you would expect from a spray on product. From the moment you spray it on, she chassis looks exceptional. Gives your diffs and chassis that fresh new wet shiny look but as stated in products description, dries hard. Always been happy with all my Cost Effective products and this one is no exception. Will see how it lasts over the next 12 months.
1bottle covered a whole 105 Series Landcruiser with a little left over, and I wasn’t exactly sparing when applying.
Only feedback for production, when applying, the spray mechanism can leak a little making trigger and bottle difficult to hold, hopefully you can find a way to get a better seal for future products.