Description

XTROLL Chassis Guard is the ultimate rust protection Spray for your 4wd. 

Chassis guard is the go to under spray to stop or prevent salt water and rust from destroying your vehicle 

The easy to use spray bottle application is perfect for both new and older vehicles.

With a long-lasting clear hard drying finish.

Xtroll Chassis Guard 

COVERAGE:  1 Ltr will cover most 4wd underbody’s.
                            2 Ltr for heavily corroded vehicles or larger 4wd’s 
(Up to 25 sqm on clean, well prepared surfaces)

DRYING TIME: 6 – 12 hours per coat, depending on conditions.

CLEAN UP: Mineral Turps

HOW TO APPLY: Spray evenly across all underbody surfaces.
When possible apply a second coast 4 to 6 hours after first coat

Chassis Guard Application Guide

Xtroll Chassis Guard 

COVERAGE:  1Ltr will cover most 4wd underbody’s.
                            2 Ltr for heavily corroded vehicles
Up to 25 sq. meters on clean, well prepared surfaces.

DRYING TIME: 6 – 12 hours per coat, depending on conditions.

CLEAN UP: Mineral Terps

HOW TO APPLY: Spray evenly across  all underbody surfaces.
When possible apply a second coat 4 to 6 hours after first coat.

Avoid overspray  so as not to damage paintwork  – Under chassis application only. 

(avoid all sensors and wiring connectors)

Chassis Guard Preparation 

Chassis Guard can be applied directly to the underbody of your 4wd.

Best practice:

• Apply Chassis Guard to a clean surface.
• Give the underbody surface a detergent based wash followed up with a degrease and water wash down.
• Once dry apply Chassis Guard. 
• Allow 7 days drying time before exposing to a heavy salt water environment.

Having a grime free surface will give chassis guard a much better adhesion that may only need to be reapplied every 12 months.

Chassis Guard Application Guide

Click Here to view the Material Safety Data Sheet

Xtroll Chassis Guard After Beach Maintenance  

AFTER CARE:

The best thing about Chassis guard  is how easy it is to wash away the salt and  sand after hitting the beach.  The barrier created by Chassis Guard will only require a water wash down to remove any  remaining salt water and sand. 

A water hose-off is sufficient.

When washing vehicle post beach do not apply the following to the underside of the vehicle as this will make the Chassis Guard less effective

• Degreasers
• Detergents or heavy solvents.
• Avoid Detergent and Presoak cleaners.

Chassis Guard can be re applied if required.